📬Updates

After update you can check prevotes/precommits status

FOLDER=.quicksilverd

# find out RPC port
echo -e "\033[0;32m$(grep -A 3 "\[rpc\]" ~/$FOLDER/config/config.toml | egrep -o ":[0-9]+")\033[0m"

PORT=<enter_your_port>

curl -s localhost:$PORT/consensus_state | jq '.result.round_state.height_vote_set[0].prevotes_bit_array' && \
curl -s localhost:$PORT/consensus_state | jq '.result.round_state.height_vote_set[0].precommits_bit_array'

Updates are available for information. Boot via State sync or Snapshot to avoid installing all updates. In this case, you must use the actual version of the binary file and genesis

With full synchronization, start from 1.1.0-innuendo

UPD 🕊 on v1.7.1 (before 573000)

cd $HOME/quicksilver
wget -O quicksilverd https://github.com/quicksilver-zone/quicksilver/releases/download/v1.7.1/quicksilverd-v1.7.1-amd64
chmod +x $HOME/quicksilver/quicksilverd
$HOME/quicksilver/quicksilverd version --long | grep -e version -e commit -e build_tags
# version: v1.7.1
# build_tags: netgo ledger muslc,
# commit: f11e862d6c39e8b355c7c4fa55da18ce36357752

# AFTER THE NETWORK IS STOPPED ON THE REQUIRED BLOCK!!!
systemctl stop quicksilverd
mv $HOME/quicksilver/quicksilverd $(which quicksilverd)
quicksilverd version --long | grep -e version -e commit -e build_tags
#

systemctl restart quicksilverd && journalctl -u quicksilverd -f -o cat

UPD 🕊 on v1.7.6-testnet (before 1863000)

cd $HOME/quicksilver
wget -O quicksilverd https://github.com/quicksilver-zone/quicksilver/releases/download/v1.7.6-testnet/quicksilverd-v1.7.6-testnet-amd64
chmod +x $HOME/quicksilver/quicksilverd
$HOME/quicksilver/quicksilverd version --long | grep -e version -e commit -e build_tags
# version: v1.7.6-testnet2
# build_tags: netgo ledger muslc,
# commit: a1b8617e6c11975a6c8ad5b941a5d066c016704f

# AFTER THE NETWORK IS STOPPED ON THE REQUIRED BLOCK!!!
systemctl stop quicksilverd
mv $HOME/quicksilver/quicksilverd $(which quicksilverd)
quicksilverd version --long | grep -e version -e commit -e build_tags
#

systemctl restart quicksilverd && journalctl -u quicksilverd -f -o cat

UPD 🕊 on v1.8.0-testnet (before 2786000)

cd $HOME/quicksilver
wget -O quicksilverd https://github.com/quicksilver-zone/quicksilver/releases/download/v1.8.0-rc.0/quicksilverd-v1.8.0-rc.0-amd64
chmod +x $HOME/quicksilver/quicksilverd
$HOME/quicksilver/quicksilverd version --long | grep -e version -e commit -e build_tags
# version: v1.7.0-rc.0
# build_tags: netgo ledger muslc,
# commit: e082f944ba31cc82ab8e857cd69a5fbb91b00910

# AFTER THE NETWORK IS STOPPED ON THE REQUIRED BLOCK!!!
systemctl stop quicksilverd
mv $HOME/quicksilver/quicksilverd $(which quicksilverd)
quicksilverd version --long | grep -e version -e commit -e build_tags
#

systemctl restart quicksilverd && journalctl -u quicksilverd -f -o cat

UPD 🕊 on v1.8.0-rc.1 (before 2897000)

cd $HOME/quicksilver
wget -O quicksilverd https://github.com/quicksilver-zone/quicksilver/releases/download/v1.8.0-rc.1/quicksilverd-v1.8.0-rc.1-amd64
chmod +x $HOME/quicksilver/quicksilverd
$HOME/quicksilver/quicksilverd version --long | grep -e version -e commit -e build_tags
# version: v1.8.0-rc.1
# build_tags: netgo ledger muslc,
# commit: 044d63e5b802ed1a66c76927e8a760354984cb37

# AFTER THE NETWORK IS STOPPED ON THE REQUIRED BLOCK!!!
systemctl stop quicksilverd
mv $HOME/quicksilver/quicksilverd $(which quicksilverd)
quicksilverd version --long | grep -e version -e commit -e build_tags
#

systemctl restart quicksilverd && journalctl -u quicksilverd -f -o cat